|
|
|
|
|
Technical Parameters System Supply Monoblock X-Ray Tube Voltage | AC 100-240 ± | Frequency | 50/60 Hz | Electric current | 2.1 A(@240V), 5.5 A (@100V) | Max power consumption | 640 VA | Fuse | 6.3 AT | Connection | 7 wires cable with double insolation |
Tube Voltage | 60 kVp ± 8 % 65 kVp ± 8 % 70 kVp ± 8 %
| Anodic current | 7 mA± 10 % | Duty cycle | 1/30 6 seconds minimum | Nominal power | 490 W (70 kVp – 7 mA) | Total filtration | >1.5 mm Al eq. | Current transformer insulation | Oil bath | Cooling | As per convention | Focal spot | 0.4 mm (IEC 60336) | Max thermal capacity of monoblock | 130 kJ | Focus to skin distance | 20 cm (8 5/8 inch) | Output radiation Field | Φ 60mm (2 3/8 inch) | Bean limiting device (additional) | Rectangular 36 x45 mm |
Model | Toshiba D-045 | CEI OX70-4 | Target angle | 16° | 20° | Filament current | Max. 3 A | 1.5 – 2.1 A | Max filament current | 3 V | 1.7 – 3.1 V | Anodic thermal capacity | 4.3 kJ | 7 kJ | Max anodic dissipation | 100 W | 110 W | X RAY beam covering at 200 mm from the focus | >= 70 mm | >= 70 mm | Focal spot | 0.4 mm (IEC 60336) | 0.4 mm (IEC 60336) | Target material | Tungsten | Tungsten | Max nominal voltage | 70 kV | 70 kV |
|
|
|
|
|
|
|
|